Epoxy floor coatings – Earlier, epoxy paint was used mostly on floors in factories and at workshops because it can handle high loads, has a high abrasion resistance and is very cleaning-friendly. Epoxy paint consists of two components – a base, a so-called epoxy resin, mixed with a hardener, immediately before painting. The chemical composition makes the material rigid and extremely strong when the two components harden.
The substrate must be in order The substrate must be dry, clean and greasy so that the paint is properly attached. Plain surfaces are easily sanded, concrete with a diamond slate, wood with sandpaper. Suction surfaces are ironed with a foundation designed for epoxy. Sprays are filled with epoxy floor coatings particle pulp that works the same. Thoroughly mix Thoroughly mix: Epoxy paint consists of two components, a base and a hardener to be blended into precise targets to cure as desired.
Mix the parts epoxy floor coatings fully into the edges with low-speed whipping machine. Just mix what you need.Work fast: Once the paint is mixed, you have only limited time to paint in, typically 2 hours. The substrate must have a temperature of at least 15 degrees in order for the paint to cure. Distributed by short-rolled roll. Work wet in wet, otherwise you will risk shade differences. As a rule, two layers of paint are required. Ensure good ventilation.