Stove To Fireplace Heat Exchange

Author: icahd | Categories: FIREPLACE comments
Diy Fireplace Insert Fresh Amazing Diy Passive Heat Exchanger For Wood Stove Intended

Fireplace heat exchange -Before buying, be familiar with the basic principle of the operation of the heater. The design often takes place with iron or steel. The furnace itself is a steel chamber, for closed types with a thickness of 6 mm. And for the open types – by 4 mm. To ensure the combustion process in the oven. Ca. 40 liters of heat carrier circulate in the pipes in the heat exchange, so heated water enters the system installed in the cottage’s premises.

A stove with a fireplace heat exchange is suitable for use in country houses. These units are comfortable, safe and fit well into the room’s room. Also fireplaces are suitable for heating in villages and villages where there are interruptions in electricity and not a gas pipeline. Such devices can be connected with the hands of an existing heating system such as reserve or water heating. Fireplaces have a number of advantages:

For long lasting and comfortable use, it is first and foremost necessary to pay attention to the device’s quality and characteristics.Power. Depends on the size of the ovens and the dimensions of the structure as a whole. If you look at the oven’s technical properties, pay attention to the rated power. The required power must be calculated from the fact that for fireplace heat exchange 10 square meters. 1 kW power is required.

Comments are closed.